Your Search: "pnw"

Our oval chainring features our highly sought-after tooth profile for the best 1x drivetrain performance. Combine this chainring with a modern-day clutch derailleur and never worry about dropping a chain again. - Oval shape allows for greater power, increased traction, and a smoother spin - Blackspire's oval shape has an ovality of 12-13% with a timing of 115 degrees after the top dead-center - Highly sought-after narrow-wide tooth design provides excellent chain retention without a chain guide - Perfect for 1x setups and compatible with 9/10/11, and 12-speed systems, 9-speed drivetrains require a 10-speed chain - Fitment: Shimano XT M8000 and SLX M7000, asymmetrical 96BCD - Features built-in tabs for a 49mm chainline and is threaded for ideal fitment - CNC'd in Canada from 7075 aluminum with laser-etched graphics

Our Narrow/Wide Snaggletooth chainring features our highly sought-after tooth profile. Combine this chainring with any modern-day clutch derailleur and never worry about dropping a chain again. - Highly sought-after narrow-wide tooth design provides excellent chain retention without a chain guide - Perfect for 1x setups and compatible with 9/10/11, and 12-speed systems. 9-speed drivetrains require a 10-speed chain - For SRAM DM Boost cranks, 3mm offset for a perfect 52mm chainline - For SRAM DM cranks, 6mm offset for a perfect 49mm chainline - CNC'd in Canada from 7075 aluminum with laser-etched graphics

Compatible with *SRAM Direct Mount BB30 Narrow/Wide Snaggletooth chainring features our highly sought-after tooth profile. Combine this chainring with any modern-day clutch derailleur and never worry about dropping a chain again. - Highly sought-after narrow-wide tooth design provides excellent chain retention without a chain guide - Perfect for 1x setups and compatible with 9/10/11, and 12-speed systems. 9-speed drivetrains require a 10-speed chain - For SRAM DM Boost cranks, 3mm offset for a perfect 52mm chainline - For SRAM DM cranks, 6mm offset for a perfect 49mm chainline - CNC'd in Canada from 7075 aluminum with laser-etched graphics

Our Shimano M9100 Narrow/Wide Snaggletooth chainring features our highly sought-after tooth profile. Combine this chainring with any modern-day clutch derailleur and never worry about dropping a chain again. - Highly sought after Bi Directional narrow-wide tooth design provides excellent chain retention without a chain guide - Direct mount for Shimano M9100, M8100, and M7100 and perfect for 1x setups - Features a perfect 51mm to 55mm chainline, depending on axle length and spacer configuration - CNC'd in Canada from 7075 aluminum with laser-etched graphics

Our Shimano M9100 Narrow/Wide Oval Snaggletooth chainring features our highly sought-after tooth profile. Combine this chainring with any modern-day clutch derailleur and never worry about dropping a chain again. - Oval shape allows for greater power, increased traction, and a smoother spin - Highly sought-after bi-directional narrow-wide tooth design provides excellent chain retention without a chain guide - Direct mount for Shimano M9100, M8100, and M7100 and perfect for 1x setups - Features a perfect 51mm to 55mm chainline, depending on axle length and spacer configuration - CNC'd in Canada from 7075 aluminum with laser-etched graphics

SRAM's 1x Eagle component system boasts a twelve-speed cassette. We built pulleys that can handle the load better than stock. These CeramicSpeed Pulley Wheels work with less drag, adding to the power transmitted to the rear wheel while offering greater durability, going longer between replacement intervals. These pulleys are also fully compatible with the SRAM Eagle AXS derailleur. The aluminum pulleys with standard bearings are 34.4% more efficient than stock and use our low-drag, long-life Standard Bearing with hardened-steel races and our super-round CeramicSpeed balls. The upper and lower pulleys both have a narrow-wide tooth design with 14 teeth each. As the upper and lower pulleys have different tasks, they have different shapes. You'll find they are thus marked, and have directional arrows. These pulleys should be installed with stock SRAM pulley spacers. Save those from your old pulleys before installing CeramicSpeed. The kits come with CeramicSpeed Oil in a 15ml dropper bottle and grease in 5ml syringe. The bearings come pre-oiled. The grease can be used on the pulley bearings when riding in particularly harsh environments. In the box: - 2 x 14-tooth pulley wheels - CeramicSpeed Bearing Oil in 15ml dropper bottle - CeramicSpeed Grease in 5ml syringe - Sticker sheet

This awesome bicycle basket liner is the ultimate cruiser bike accessory. This original bike basket liner is all-weather friendly, reversible, and crafted in nylon rip-stop material with durable and sturdy draw straps to convert easily into a generously-sized market bag, gym bag, yoga bag, beach bag, or tote bag! Featuring two deep pockets (water bottle size). Also folds up easily into a compatible zippered pouch. Easy to take in and out of bike basket. - Fits all standard wire and wicker baskets - 15 x 10 x 10-inches - Water resistant and fade resistant - Converts easily into versatile, stylish, adorable everything bag - Available in many different styles - Basket sold separately

The PN 1.1 answers the call for a softer option in our Performance Narrow line. It has 40-series padding, making it a great choice for riding in thin triathlon-style shorts, or for anyone who simply wants a softer ride. Similar to the other PN saddles, the PN 1.1 is 110mm wide, offering superb thigh and hamstring clearance. This allows for more rider body movement around the seat, and is great for diving into fast corners. Like all ISM saddles, the PN 1.1 is nose-less and designed to remove pressure from soft tissue, ensuring maximum blood flow, no genital numbness, and a healthier, more enjoyable ride. Key features: - Narrow design for maximum thigh clearance - Enables total freedom-of-movement for the rider - Same shape as the PN 1.0, with extra padding Commonly used for: - Road bikes - Triathlon bikes - Time Trial bikes Tech specs: - Category: Performance Narrow - Length: 275mm - Width: 110mm - Padding: 40-Series Foam and Gel - Rails: Satin Steel - Colors: Black, white Available as part of the ISM Demo Program

New for 2018, ISM proudly introduces the PN 3.1. Starting from our PN 3.0 chassis, we added more padding for riders who prefer a slightly softer ride. With a 120mm rear end and and tapered edges, the PN 3.1 is so comfortable, it will “disappear” underneath you. Similar to the other PN saddles, the PN 3.1 offerings superb thigh and hamstring clearance. This allows for more rider body movement around the seat, and is great for diving into fast corners. Like all ISM saddles, the PN 3.1 is nose-less and designed to remove pressure from soft tissue, ensuring maximum blood flow, no genital numbness, and a healthier, more enjoyable ride. Key features: - All-new saddle shape - Tapered-edge mold design for incredible comfort - Auto-racing inspired air vent chassis Commonly used for: - Road bikes - Triathlon bikes - Time Trial bikes Tech specs: - Category: Performance Narrow - Length: 255mm - Width: 120mm - Padding: 40-Series Foam - Rails: Chromoly - Colors: Black, white

The PN 1.0 is ready to take on any road. With the same chassis as the beloved Attack saddle, the PN 1.0 has a sleek updated look to match any bike. While originally slated as a road bike saddle, it has proven to be equally loved by triathletes and time trialists. Like the other PN saddles, the PN 1.0 is 110mm wide, offering superb thigh and hamstring clearance. This allows for more rider body movement around the seat, and is great for diving into fast corners. Like all ISM saddles, the PN 1.0 is nose-less and designed to remove pressure from soft tissue, ensuring maximum blood flow, no genital numbness, and a healthier, more enjoyable ride. Key Features: - Narrow design for maximum thigh clearance - Enables total freedom-of-movement for the rider Commonly Used For: - Road bikes - Triathlon bikes - Time Trial bikes - Tech Specs: Category: Performance Narrow - Length: 275mm - Width: 110mm - Padding: 25-Series Foam and Gel - Rails: CrN/Ti Alloy or Proprietary Stainless Steel Alloy - Colors: Black, White - Available as part of the ISM Demo Program

The PN 3.0 is the sleek new saddle that will take your ride to the next level.  Starting from our Performance Narrow chassis, we used feedback from our professional athletes to make the next evolution in saddle design.  With a slightly wider 120mm rear end and an updated shape, the PN 3.0 is so comfortable, it will “disappear” underneath you. Key features: - All-new saddle shape Key features: - All-new saddle shape - Tapered-edge mold design for incredible comfort - Auto-racing inspired air vent chassis Commonly used for: - Road bikes - Triathlon bikes - Time Trial bikes Tech specs: - Category: Performance Narrow - Length: 255mm - Width: 120mm - Padding: 30-Series Foam - Rails: Proprietary Stainless Steel Alloy - Colors: Black, white, black with pink base, black with blue base - Tapered-edge mold design for incredible comfort - Auto-racing inspired air vent chassis

Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts

Add a little flair and extra visibility to your ride. A Saddle Charm adds character to the tail of your whip! Made of our woven handlebar tape, a sturdy thread locking loop, and highly reflective 3M trim, our Saddle Charms can be attached to the rails of your saddle, the bag loops on a Brooks England saddle, or just about anywhere on your bike or bag for a pop of added safety and fun. They may even give you a bit of extra luck.

It's always a good idea to have backup hardware. This is a replacement hardware pack for Portland Design Works Payload or Loading Dock rear racks. - 2x P clamps - 4x nyloc nuts - 4x hex bolts

Portland Design Works' 16 ounce Co2 Cartridges are threaded, work with most Co2 inflators that require threaded cartridges, and are food-grade so they're completely gentle and safe for your valves and tubes.

Every commuter bike needs a good bell, and this is it: It's a Brass Bell. It's small, it's loud, it's not ostentatious, It's a Brass Bell. Greet your friends, alert pedestrians, put a ring on it! - Fits 22.2mm handlebars

These clip-on fenders are designed specifically for fat bikes. They're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. - Extra-long and wide to accommodate the biggest tires - Easy to install and fits virtually any bicycle - Works with both rigid and suspension forks

The PDW Outpost Mount allows you to attach a handlebar-mounted headlight to the side of your tapered wire basket—eliminating the problem of basket cargo blocking the light beam. The attachment plate compensates for the angle of a tapered wire basket, allowing the headlight to stay nice and level. - 32mm diameter clamping area for lights - Attaches with two M5 bolts and a steel backing plate - Mounts on left or right side

Just the thing for rainy weather, the Portland Design Works minimalist Origami Front Fender attaches to a snap-on/off bracket you mount on your downtube. And it folds flat so you can easily stow it when not in use. - Length: 370mm (14.5") - Weight: 60g (2.1oz)

Portland Design Works has given the original fat bike front fender a facelift! The Mud Shovel 6.5 Front Fender was designed specifically for fat bikes - they're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. Made of heavy-duty polymer, the Mud Shovel 6.5 Front Fender is super lightweight but sturdy enough to take years of bad weather abuse. The fender mounts to the downtube of your bike using adjustable rubber straps for a secure fit. - Front fender is 254mm wide and 622mm long (10" x 24.5") - Extra-long, wide design blocks snow, water and sand - Bracket keeps fender super stable and is easy to install - Built with lightweight, sturdy materials for durability

The Fatty Object CO2 inflator fits on both Presta and Schrader valves and its oversized control knob is easy to operate, even with gloves on. - Precision machined alloy parts - For use with both Presta and Schrader valves

Portland Design Works' Shiny Object is made from aluminum for strength and low weight so you won't think twice about bringing this ride essential along with you. A control knob keeps you in charge of the pressure, it takes threaded Co2 cartridges (sold separately) and it fits both Presta and Schrader valves. - Inflator only height: 44 mm (1.75") - Inflator only weight: 40 g (1.5 oz) 

Put on the high beams for extra visibility even in the dark corners of space. Portland Design Works' Spaceship Headlight boasts 3 bright LEDs which shine through a precision lens for a bright, focused beam. It offers steady and flashing modes and has a run time of over 100 hours. - Fits 22.0-31.8mm handlebars - Runs on 2 x AA batteries (included) - 100 hours run time - Steady and flashing modes - 91 grams/3.2 ounces - 98 x 41 x 35mm

Just the thing for rainy weather, the Portland Design Works minimalist Origami Rear Seatpost Fender attaches to a clamp-on bracket you mount to your seatpost. And it packs down so you can easily store it when not in use. - Length: 445mm (7.5") - Weight: 160g (5.6oz)

Portland Design Works' neat Sodapop Fenders are made from 97% post-consumer recycled bottles. They pop on and off with ease, keep you dry in the rain, and get one back for the planet, too! - City width: 48 mm at tail - Mountain width: 64 mm at tail

It's a CO2 inflator! Constructed of durable alloy and composite, this price-point CO2 inflator is sure to save you on the side of the road. The oversize control knob makes for easy regulation of air flow. Comes with two 16g CO2 cartridges and a foam sleeve to protect your fingers from the frosty cartridge. - Oversize control knob regulates CO2 flow - Durable composite and alloy construction - Includes 2x 16g CO2 cartridges + 1 foam sleeve - Presta and Schrader compatible

Portland Design Works' 3wrencho is a strong and versatile addition to your fixed gear, townie or workbench! Made of heat-treated steel for extra toughness, it's part tire lever, part 15mm wrench. Its strong nylon coating won't scratch rims, so you can pry as hard as you need to remove stubborn tires. Step on the 3wrencho for extra leverage to loosening axle nuts. May also be used to spread peanut butter, stir a drink, or open a letter. - Length: 114 mm (4.5") - Weight: 95 g (3.5 oz)

Portland Design Works' incredibly lightweight and compact Tiny Object CO2 Inflator efficiently fills flats. Use the control knob to dial in the perfect pressure while the included leather sleeve protects your hands from frosty CO2 cartridges. Its rugged alloy body is built to withstand years of road- and trail-side repairs. - Presta valve compatible - Control knob easily regulates CO2 flow - Full grain leather sleeve is vegetable tanned and conditioned with natural oils and waxes - Lifetime PDWarranty

Everybody knows you can't really shred without a solid power stance. The Power Stance kickstand is the whammy bar of kickstands. Take your city shred session to the next level when you slam down the Power Stance. WEOW WEOW! Built with e-bikes, cargo bikes, touring bikes and commuters in mind, the Power Stance is incredibly sturdy. The length is adjustable by the push of a button for quick installation and easy adjustment if parked on uneven ground. Lean easy for years to come with the ultra burly Power Stance kickstand. - Direct mount version - Burly construction is great for supporting heavy bikes - Adjust the length with the press of a button - Durable composite foot - Lifetime PDWarranty

Everybody knows you can't really shred without a solid power stance. The Power Stance kickstand is the whammy bar of kickstands. Take your city shred session to the next level when you slam down the Power Stance. WEOW WEOW! Built with e-bikes, cargo bikes, touring bikes and commuters in mind, the Power Stance is incredibly sturdy. The length is adjustable by the push of a button for quick installation and easy adjustment if parked on uneven ground. Lean easy for years to come with the ultra burly Power Stance kickstand. - Center mount version is compatible with almost any adult bicycle - Burly construction is great for supporting heavy bikes - Adjust the length with the press of a button - Durable composite foot - Lifetime PDWarranty